|Product Name:||Electric Brake Magnet||Use:||Trailer Parts|
|Size:||12.25 Inch||Max Payload:||8000-15000 Lbs|
|Certificate:||IATF16949:2016||Product Dimensions:||102*89.8*63.5 Mm|
12.25*3.375 Inch Electric Trailer Brake Magnet 12 V Replacement Kits
Electric Trailer Brakes not Working
There are a number of reasons why the brakes on your trailer may not be working. Lets start with the easiest things to check.
First, check the vehicle and trailer connectors for corrosion. This can cause a short inside the connector and the brake feed circuit and ground are at the bottom of the connector so moisture affects these connections first.
Next, check the ground wire on the vehicle and trailer connectors, trailer brake magnets and the brake controller itself. If there is a bad ground connection the trailer brakes will not work.
Next, check the brake controller wiring. Sever the blue brake output wire, leaving enough room to splice it back together when testing is done and then apply the manual slide. Using a circuit tester, like item # 3808, you should get output to the trailer brakes, blue wire. If the manual slide activates the trailer brake output wire properly, try the brake pedal. If the brake pedal activates the brake output properly the problem is farther back either in the vehicle wiring or on the trailer.
If either the brake pedal or the manual slide are not functioning properly you will need to test the wires going into the brake controller. Make sure you have power entering the brake controller on the black wire and on the red wire only when the brake pedal is pressed. If these wires test correct, and there is no output, your brake controller most likely needs to be replaced.
|Model No.||Brake type||Wideness||Thickness||Voltage||Cylinder||Max.Load|
|B07E(AZ008)||Electric Brake||7||1 1/4||12||2000 lb|
|B10E(AZ004)||Electric Brake||10||2 1/4||12||3500 lb|
|B11E(AZ017)||Electric Brake||11||2||12||6000 lb|
|B12E(AZ003)||Electric Brake||12||2||12||7000 lb|
|B35E(AZ056)||Electric Brake||10||1 3/4||12||3500 lb|
|B44E(AZ063)||Electric Brake||10||2 1/4||12||4400 lb|
|B10EA(AZ022)||Electric Brake self-adjusting||10||2 1/4||12||3500 lb|
|B11EA(AZ064)||Electric Brake self-adjusting||11||2||12||6000 lb|
|B12EA(AZ021)||Electric Brake self-adjusting||12||2||12||7000 lb|
|B35EA(AZ060)||Electric Brake self-adjusting||10||1 3/4||12||3500 lb|
|B44EA(AZ057)||Electric Brake self-adjusting||10||2 1/4||12||4400 lb|
|B10EAP(AZ037)||Electric Brake self-adjusting w/parking||10||2 1/4||12||3500 lb|
|B12EAP(AZ036)||Electric Brake self-adjusting w/parking||10||2||12||7000 lb|
|B07EP(AZ034)||Electric Brake with Parking lever||7||1 1/4||12||2000 lb|
|B10EP(AZ013)||Electric Brake with Parking lever||10||2 1/4||12||3500 lb|
|B12EP(AZ011)||Electric Brake with Parking lever||12||2||12||7000 lb|
|B35EP(AZ061)||Electric Brake with Parking lever||10||1 3/4||12||3500 lb|
|B44EP(AZ062)||Electric Brake with Parking lever||10||2 3/4||12||4400 lb|
1. Our joint venture partners are American Famous axle company AXLETEK,we have make a cooperation for 6 years.So we can supply stable and high quality brakes.
2. We have Researching and Development Department in Detroit,so we are also capable of developing products according drawing or samples to meet the special requirement of our customes.
3. We can supply 7 inch,10 inch,12 inch and 12.25 inch brakes for the moment.
4. All the parts for the brakes are produced by ourself,so we can supply our customer high quality products with resonable price.
5. We can also supply axle assemly.
Contact Person: Airuisales