|Product Name:||Electric Brake Shoe||Use:||Trailer Axle Parts|
|Size:||12.25 Inch||Max Payload:||7200-15000 Lbs|
|Type:||Free Backing With Parking Level||Quality:||100% Guaranteed|
12.25*2.5 Inch Electric Trailer Brake Shoes,
IATF16949 electric trailer brake shoes,
brake shoes for electric trailer brakes
How Hydraulic brakes work
A hydraulic braking system is a brake pedal attached to a piston full of a nearly incompressible brake fluid connected to another piston near the wheels attached to brake pads which push on the rotors on a wheel. When you push down on the brake pedal of a car, you make some fluid pressure P=Force/Area where the force is the force of your foot on the pedal (equalt to the force of the pedal back on your foot) and the area is the cross sectional area of the piston. That pressure is a lot higher than the pressure of your foot on the pedal, because the foot-pedal contact is much more spread out than the little piston area. Fluids will transmit pressure throughout the whole fluid, so the piston at the other end will push harder on the brake pads, pressing them against the rotors. The friction between them causes the rotational energy of the wheels to turn to heat and stop the vehicle.
Since the brake fluid is nearly incompressible, you don't have to press the pedal far to make the pressure go way up. Squeezing liquid into just a bit smaller volume makes a big difference in pressure. (If air gets in your brake system, then you have to push the pedal much farther because air is very compressible.)
|Heavy duty Electric Brake||12 1/4||3 3/8||12||8000 lb|
|Heavy duty Electric Brake||12 1/4||3 3/8||12||10000 lb|
|Heavy duty Electric Brake||12 1/4||5||12||12000 lb|
|Heavy duty Electric Brake w/Parking||12 1/4||3 3/8||12||8000 lb|
|Heavy duty Electric Brake w/Parking||12 1/4||3 3/8||12||10000 lb|
|Heavy duty Electric Brake||12 1/4||3 3/8||Duo-servo||10000 lb|
Q1: Are you trading company or manufacture?
A: We are factory,and welcomed to visit our factory.
Q2:Can I mix different models in one container?
A:Yes while quantity of each model reaches MOQ.
Q3:Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.
Q4:How about your delivery time?
Q5: Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
1. We have Researching and Development Department in Detroit,so we are also capable of developing products according drawing or samples to meet the special requirement of our customes.
2. We can supply 7 inch,10 inch,12 inch and 12.25 inch brakes for the moment.
3. All the parts for the brakes are produced by ourself,so we can supply our customer high quality products with resonable price.
4. We can also supply axle assemly.
Contact Person: Airuisales